Kia CEED Owner's Manual page 477

Hide thumbs Also See for CEED:

Table of Contents

Engine compartment panel fuse

1. Turn the ignition switch and all other

switches off.

2. Remove the fuse box cover by press-

ing the tap and pulling up.

3. Check the removed fuse; replace it if it

is blown. To remove or insert the fuse,

use the fuse puller in the engine com-

partment fuse panel.

4. Push in a new fuse of the same rating,

and make sure it fits tightly in the clips.

If it fits loosely, we recommend that you

consult an authorised Kia dealer.

After checking the fuse box in the

compartment,

install the fuse box cover. If not,

electrical failures may occur from

water leaking in.

If the main fuse is blown, it must be

removed as follows:

1. Turn off the engine.

2. Disconnect the negative battery cable.

3. Remove the nuts shown in the picture

4. Replace the fuse with a new one of the

same rating.

5. Reinstall in the reverse order of

Show Quick Links

Chapters

Table of Contents