Power Window Lock Button - Kia CEED Owner's Manual

Features of your vehicle
Automatic reversal
If the upward movement of the window is
blocked by an object or part of the body,
the window will detect the resistance and
will stop upward movement. The window
will then lower approximately 30 cm (11.8
in.) to allow the object to be cleared.
If the window detects the resistance
whilst the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 2.5 cm (1 in.). And if the power
window switch is pulled up continuously
again within 5 seconds after the window
is lowered by the automatic window
reversal feature, the automatic window
reversal will not operate.
4 26
✽ ✽ NOTICE
The automatic reverse feature is only
active when the "auto up" feature is
used by fully pulling up the switch. The
automatic reverse feature will not oper-
ate if the window is raised using the
halfway position on the power window
switch.
WARNING
Always check for obstructions
before raising any window to avoid
OUN026013/H
injuries or vehicle damage. If an
object less than 4 mm (0.16 in.) in
diameter is caught between the
window glass and the upper win-
dow channel, the automatic reverse
window may not detect the resist-
ance and will not stop and reverse
direction.

Power window lock button

(if equipped)
The driver can disable the power window
switches on rear passenger doors by
pressing the power window lock button
located on the driver's door to the LOCK
position (pressed).
OJD042021R