Troubleshooting; Specifications - Panasonic KY-E227B Operating Instructions Manual

Troubleshooting

w The heat power has reduced.
Symptom Probable cause
When using IH heater The power save function
q
The heat power has
reduced in a phased q
If the internal temperature of the main unit
manner.
becomes very high, the heating power will be
q
The heat does not go
reduced in a phased manner to power [6].
up even pushing the q
button.
p
In case using high power or continuously using.
q
p
q
q
Power save function is activated with the
intake/exhaust vent clogged.
q
p
Pots such as earthen pots (even if they are
indicated for induction heating) causing the
IH heater to overheat are used.
p
w Noise from the main unit (cooling fan)
q
Even after the main power The cooling fan normally operates in order to suppress the temperature rise in the
switch is turned off, the main unit.
fan is still running. After the temperature decreases to a certain level, the fan will stop automatically.
q
w Others
q
Timer setting is cleared Approx. 10 seconds have elapsed without
unintentionally. any button being pressed before heating.
q
Setting of congee
program is cleared
unintentionally.
q
Noise is generated from Resonant sounds may be heard from pot
pot while heating. depending on the type of pot.
( When you hold the handle, you may feel
a small vibration.)
q
q
If the pot is removed when being heated, a short metallic sound may be heard.
q
22
Remedy Page
Increasing heat levels will be
enabled after the unit is cooled
down.
12
q
Remove anything that is
clogging the intake/exhaust
vent.
–
q
q
Use a pot that is compatible
with the IH heater.
10
q
–
q
Restart the operation from
the beginning.
q
13, 15
q
It may stop when the pot is
slightly moved or replaced.
* To prevent burn, do not
touch the metallic parts of
the pot directly.
–
q
*
–
Specifications
Power supply
Power consumption
Dimensions (approx.)
Weight (approx.)
9-level adjustment
Heat adjustment (approx.)
120W to 3,000W
Cooking timer
q
Standby power consumption: approx. 2.5W * When the power switch is turned off.
w If IH heaters are turned on simultaneously,
q
The maximum power of the IH heaters will be adjusted automatically so as to keep the total power under
3,000W (KY-E227B) or 2,600W (KY-C227C).
q
Heat level of the IH heater will go down when the other IH heater is used.
q
If you attempt to select heat level [9], you will hear a buzzer and the power will remain unchanged.
q
*
w
q
q
q
KY-E227B KY-C227C
Single phase 220 V 50 Hz
3,000 W 2,600 W
749 mm (W) M 450 mm (D) M 108 mm (H)
12.0 kJ
9-level adjustment
Equivalent to Equivalent to
120W to 2,600W
1 minute to 9 hours and 30 minutes
, ,
, ,
23