Lenovo ThinkPad T540p User Manual page 59

4. Change the display output location by pressing the F7 key. This enables you to switch between viewing
output on the external monitor, the computer monitor, or both monitors.
If your computer cannot detect the external monitor, right-click on the desktop, then select Screen
resolution. Click the Detect button.
Notes:
• If the monitor connector is not compatible with the Mini DisplayPort connector or Thunderbolt connector
on your computer, you can use a convert cable to establish the connection. Convert cables are available
as options from Lenovo at http://www.lenovo.com/essentials.
• Use a Mini DisplayPort certified cable with Mini DisplayPort icon (
stable functionality.
Setting the external monitor type
To set the external monitor type, do the following:
1. Connect the external monitor to your computer, and then connect the monitor to an electrical outlet.
2. Turn on the external monitor.
3. Right-click on the desktop, and click Screen resolution.
Note: If your computer cannot detect the external monitor, click the Detect button.
4. Select the external monitor and set Resolution.
5. Click Advanced Settings.
6. Click the Monitor tab. Check the monitor information to make sure that the monitor type is correct. If it
is, click OK to close the window; otherwise proceed with the following steps.
7. If more than two monitor types are displayed, select Generic PnP Monitor or Generic Non-PnP
Monitor.
8. Click Properties. If you are prompted for an administrator password or confirmation, type the password
or provide confirmation.
9. Click the Driver tab.
10. Click Update Driver.
11. Click Browse my computer for driver software, and then click Let me pick from a list of device
drivers on my computer.
12. Clear the Show compatible hardware check box.
13. Select the correct manufacturer and model for the external monitor. If you cannot find your monitor on
the list, stop the installation of this driver and use the driver shipped with your monitor.
14. After updating the driver, click Close.
15. For the Windows 7 operating system, to change the color settings, right-click on the desktop, and click
Screen resolution. Click Advanced Settings, select the Monitor tab, then set Colors.
16. Click OK.
Considerations for connecting an external monitor
• When installing an operating system, you must install the display driver for your monitor that is provided
with the computer, and the monitor INF file that is provided with the external monitor.
• If you set a resolution higher than the resolution you are using on the computer monitor, and use an
external monitor that does not support that resolution, take advantage of the virtual screen function,
which enables you to display only a part of the high-resolution screen image your computer produces.
) to connect the device for
.
Chapter 2 Using your computer
43