Lenovo ThinkPad T540p User Manual page 134

Table 4. Config menu items (continued)
Menu item
Keyboard/Mouse
Display
118
User Guide
Submenu item
TrackPoint
Trackpad
Fn and Ctrl Key swap
Boot Display Device
Selection
• Auto
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• ThinkPad LCD
• Analog (VGA)
• Digital on ThinkPad
• Display on Dock
Comments
If you select Auto, it enables
you to connect and route
appropriate USB 3.0 or
USB 2.0 connectors.
If you select Enabled, it
enables USB 3.0 mode
and allows USB 3.0 to be
supported in the operating
system.
If you select Disabled, it
disables and hides the USB
3.0 controller, and USB 3.0
connectors will work as
USB 2.0 connectors.
Enable or disable the
built-in TrackPoint pointing
device.
Note: If you want to use
an external mouse, select
Disabled.
Enable or disable the
built-in trackpad.
Note: If you want to use
an external mouse, select
Disabled.
If you select Enabled, the
Fn key works as the Ctrl
key, and the Ctrl key works
as the Fn key.
Note: Even when Enabled
is selected, you need to
press the Fn key to resume
the computer from sleep
mode to normal operation.
Select the display device
that is to be activated at
boot time. This selection
is effective for boot time,
password prompt, and
ThinkPad Setup.
Digital on ThinkPad is the
Mini DisplayPort connector
on your computer.
Display on dock is
DisplayPort, DVI, or VGA