Load Setup Defaults; Save & Exit Setup; Exit Without Saving - Intel I440 LX User Manual

NOTE: TO SUPPORT LBA OR LARGE MODE OF HDDS, THERE MUST
BE SOME SOFTWARES INVOLVED. ALL THESE SOFTWARES
ARE LOCATED IN THE AWARD HDD SERVICE ROUTINE
(INT 13H). IT MAY BE FAILED TO ACCESS A HDD WITH LBA
(LARGE) MODE SELECTED IF YOU ARE RUNNING UNDER AN
OPERATING SYSTEM WHICH REPLACES THE WHOLE INT 13H.
UNIX OPERATING SYSTEMS DO NOT SUPPORT EITHER LBA
OR LARGE AND MUST UTILITY THE STANDARD MODE. UNIX
CAN SUPPORT DRIVES LARGER THAN 528MB.

3-10 .LOAD SETUP DEFAULTS

"LOAD SETUP DEFAULTS" loads optimized settings which are stored in
the BIOS ROM. THE AUTO-CONFIGURED SETTINGS ONLY AFFECT
THE BIOS FEATURE SETUP AND CHIPSET FEATURES SETUP SCREENS.
THERE IS NO EFFECT ON THE STANDARD CMOS SETUP. TO USE THIS
FEATURE, HIGHLIGHT IT ON THE MAIN SCREEN AND PRESS THE
<ENTER> KEY. A LINE WILL APPEAR ON SCREEN ASKING IF YOU
WANT TO LOAD THE SETUP DEFAULT VALUES. PRESS THE <Y> KEY
AND THEN PRESS THE <ENTER> KEY . THE SETUP DEFAULTS WILL
THEN LOAD. PRESS <N> IF YOU DON'T WANT TO
3-11 SAVE & EXIT SETUP
THE "SAVE & EXIT SETUP" OPTION WILL BRING YOU BACK TO BOOT
UP PROCEDURE WITH ALL THE CHANGES, YOU JUST MADE WHICH
ARE RECORDED IN THE CMOS RAM.

3-12 EXIT WITHOUT SAVING

THE "EXIT WITHOUT SAVING" OPTION WILL BRING YOU BACK TO
NORMAL BOOT UP PROCEDURE WITHOUT SAVING ANY DATA INTO
CMOS RAM. ALL OF THE OLD DATA IN THE CMOS WILL NOT BE
DESTROYED.
I440LX 26
Ver.6LX2