Page 1
PR109B and PR110B LAN Reader Module Security Systems Installer Reference Guide Security System...
Page 2
Each reader fitted to the system must be assigned a unique address on the LAN. The PR109B and PR110B readers include a rotary address switch for quick selection. The following table shows the address setting for each reader as well as the number of keypad, reader devices each panel can support.
The readers also include an egress input and lock output PR109B & PR110B Mounting Template which can be used to control door access if required. Scale 1:1 Using the on board lock output is not recommend-...
Page 4
LAN readers however it can be turned off via panel programming by setting the reader volume to the lowest level. See the Devices-Keypads & Readers-Commands menu in panel programming. Bosch Security Systems 09/11 PR109B-PR110BIRG FTR1.1...
The egress input triggers the The above examples show how to configure the PR109B lock output on the LAN reader by operating or firing the and PR110B readers to control an area and or a door on associated Access Group or Door Assignment.
Address 1. Figure 4: PR109B and PR110B Connection Diagram You must power cycle the panel or perform a LAN scan after connecting the PR109B or PR110B for Note the system to initialise the reader. Bosch Security Systems 09/11 PR109B-PR110BIRG FTR1.1...
Page 7
74mm(W), 23mm(D), 116mm(H). CM444B = 46mm(W), 12.5mm(D), 12mm H) Environment: -30˚ to 55˚C RH 5 to 85% at 30˚C non-condensing. The PR109B and PR110B should be mounted on a sturdy vertical wall using fixtures appropriate Fixing Method: for the wall construction type.