Advertisement
Setup Instructions:
Step 1: Locate the desktop button on the desk. Route
the button cable to the surge protector. The user
guide can be left attached to the button for
removal by the user.
Step 2: Plug the desktop button cable into the jack next
to the power cable on the surge protector.
Step 3: Connect the surge power connection to
a grounded outlet. If the "Not Grounded"
indicator is illuminated, your outlet might not
be properly grounded.
Step 4: Plug in equipment that needs constant power into
one of the two "Always On" outlets. Suggested
use: computers, clocks, and phones.
Step 5: Plug in equipment not requiring constant power
into one of the six "Auto Off" outlets. Suggested
use: printers, lamps, monitors, and chargers.
Caution:
–
Do not plug into an uninterruptible power supply (UPS) or plug a UPS into the Conserve Surge.
–
If the red "Not Grounded" light illuminates, this means that your building's electricity lacks a
proper ground, and you should consult an electrician.
Using the Belkin Conserve Surge with Timer
In the morning after arriving at work, the user simply presses the Belkin Conserve
Surge with Timer's desktop button once. This powers on the switched outlets, and
the electronics plugged into them turn on. This also initiates a timer in the desktop
button that starts a factory-set, 11-hour countdown.
If the user leaves for the day before the 11-hour time expires, the desktop button can
be pressed once to power down the outlets. If the user doesn't press the button, the
outlets will be powered off after the timer expires.
If a user is working late, an LED on the desktop button will begin to blink at the end
of the 11-hour period. This notifies the user of the impending shutdown. To continue
working, the user simply presses the button to reset the timer. If the user doesn't press
the button, the outlets will be powered down so that energy conservation can begin.
Belkin International, Inc.
Los Angeles, CA 90220, USA
310.898.1100
Belkin Ltd.
Belkin Ltd.
Rushden, United Kingdom
Tuggerah, Australia
+44 (0) 1933 35 2000
+61 (0) 2 4350 4600
Conserve Surge
with Timer
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed. 29PB037
Advertisement
