Table of Contents
Advertisement
2. Product specifications
Troubleshooting for Anynet+
„
Problem
Anynet+ does not work.
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message
"Connecting to Anynet+
appears on the
device..."
screen.
The Anynet+ device does not
play.
The connected device is not
displayed.
The TV Programme cannot be
recorded.
The TV sound is not output
through the receiver.
2-8
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
•
Only one receiver (home theatre) can be connected.
•
Check if the Anynet+ device power cord is properly connected.
•
Check the Anynet+ device's Video/Audio/HDMI cable connections.
•
Check whether
Anynet+ (HDMI-CEC)
•
Check whether the TV remote control is in
•
Check whether the remote control is Anynet+ compatible.
•
Anynet+ does not work in certain situations. (Searching channels, operating
or
Downloads
Plug & Play
•
When connecting or removing the HDMI cable, please make sure to search devices
again or turn your TV off and on again.
•
Check if the Anynet+ Function of Anynet+ device is set on.
•
Check if the Anynet+ device is properly connected to the TV and check if the
is set to
Anynet+(HDMI-CEC)
•
Press the TOOLS button to display the Anynet+ menu and select a menu you want.
•
Select
in the Anynet+ menu.
View TV
•
Press the SOURCE button on the TV remote control and select a device other than
Anynet+ devices.
•
Press
< CH >, CH LIST , PRE-CH, and FAV.CH to change the TV mode. (Note
that the channel button operates only when a tuner-embedded Anynet+ device is not
connected.)
•
You cannot use the remote control when you are configuring Anynet+ or switching to
a view mode.
•
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
•
You cannot use the play function when
•
Check whether or not the device supports Anynet+ functions.
•
Check whether or not the HDMI cable is properly connected.
•
Check whether
Anynet+ (HDMI-CEC)
•
Search Anynet+ devices again.
•
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables
may not support Anynet+ functions.
•
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
power
cord or a power failure, please repeat the device scan.
•
Check whether the antenna jack on the recording device is properly connected.
•
Connect the optical cable between TV and the receiver.
Possible Solution
is set to
in the
On
mode.
TV
(initial setup), etc.)
in the
menu.
On
System
Plug & Play
is set to
in the
On
menu.
System
(initial setup) is in progress.
menu.
System
My
Hide quick links:
Advertisement
Table of Contents
