Switching Between Anynet+ Devices; Recording; Listening Through A Receiver - Samsung UA32D5000PH Service Manual

Switching between Anynet+ Devices

„
1. Press the TOOLS button, then select
2. Anynet+ devices connected to the TV are listed in Device List.
N If you cannot find a device you want, press the A button to refresh the list.
3. Select a device and press the ENTERE
N Only when you set Anynet+ (HDMI-CEC) to On in the System menu, the Device List menu appears.
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the
●
switching operation.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+
●
function. Make sure to switch to an Anynet+ device by using the Device List.

Recording

„
You can make a recording of a TV Programme using a Samsung recorder.
1. Select Recording.
N When there are more than two recording devices
When multiple recording devices are connected, the recording devices are listed. Select one recording
●
device in the Device List.
When the recording device is not displayed, select Device List and press the A button to searchdevices.
●
2. Press the EXIT button to exit.
N You can record the source streams by selecting Recording: (device_name).
N Pressing the ∏(REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
N Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.

Listening through a Receiver

„
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
N If your receiver supports audio only, it may not appear in the device list.
N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL
AUDIO OUT (OPTICAL) jack of the TV.
N When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV's Optical jack.
When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When
the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound
will be heard from the receiver.
N NOTE
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
●
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
●
The Anynet+ functions do not operate with other manufacturers' products.
●
Anynet+ (HDMI-CEC).
E button. You can switch to the selected device.
2. Product specifications
2-7