Monitor Master; Main Master - Kustom KPM8420 Owner's Manual

MAIN AND MONITOR MASTER
Monitor
+12
+6
0
-6
-12
100 250 500
Feedback Notch Playback Volume
20

MONITOR MASTER

MONITOR MASTER GRAPHIC EQ:
This set of slide controls adjusts specific
frequencies in order to tailor the overall sound to
an acoustical environment or an intended sound.
FEEDBACK NOTCH (MONITOR):
This control is a narrow notch that can remove a
problem frequency that may causing excessive
feedback. To activate this feature, slowly turn the
control to find the feedback problem area. This
subtlety turns down a small area of frequencies,
thus removing the feedback without greatly
affecting the overall sound. Turning this knob full
counter-clockwise will defeat the feedback filter.
PLAYBACK VOLUME (MONITOR):
This control adjusts the amount of input from the
Playback input jacks (Rear Panel). This set of
Stereo RCA jack will accept any Line-Level audio
sources such as: CD, MP-3, DVD, HARD DISC &
TAPE PLAYER. NOTE: This controls passes
signal directly to the MONITOR Master section
and is not affected by the Channels ON/MUTE
function.
MONITOR MASTER Control:
This control adjusts the master volume of the
Monitor section.
MONITOR LED METER:
This indicates the level of Monitor Preamp output.
The number values are in dBV (1VRMS = 0dBV).
LIMITER LED:
This indicates Power Amp A has reached full
clean output. If the input signal to the power amp
increases after the LED is lit, it will be limited to
protect the speakers. Because this limiter is built
into Power Amp A, the LED only shows that the
monitors are at full output when assigned to it (See
page 9 for information on assigning power amps).
19
Limiter
+6
+3
0
-5
-10
1K 2K 4K 10K
Monitor Volume
21 22
24
+12
+6
0
23
-6
-12
100
Feedback Notch
26

MAIN MASTER

MAIN MASTER GRAPHIC EQ:
This set of slide controls adjusts specific
frequencies in order to tailor the overall sound to
an acoustical environment or an intended sound.
FEEDBACK NOTCH (MAIN):
This control is a narrow notch that can remove a
problem frequency that may causing excessive
feedback. To activate this feature, slowly turn the
control to find the feedback problem area. This
subtlety turns down a small area of frequencies,
thus removing the feedback without greatly
affecting the overall sound. Turning this knob full
counter-clockwise will defeat the feedback filter.
PLAYBACK VOLUME (MAIN):
This control adjusts the amount of input from the
Playback input jacks (Rear Panel). This set of
Stereo RCA jack will accept any Line-Level audio
sources such as: CD, MP-3, DVD, HARD DISC &
TAPE PLAYER. NOTE: This controls passes
signal directly to the MONITOR Master section
and is not affected by the Channels ON/MUTE
function.
MAIN MASTER Control:
This control adjusts the master volume of the Main
section.
MAIN LED METER:
This indicates the level of Main Preamp output.
The number values are in dBV (1VRMS = 0dBV).
LIMITER LED:
This indicates Power Amp B has reached full clean
output. If the input signal to the power amp
increases after the LED is lit, it will be limited to
protect the speakers. Because this limiter is built
into Power Amp B, the LED only indicates the
Mains are at full output when assigned to it (See
page 9 for information on assigning power amps).
7
25
Main
250 500 1K 2K 4K 10K
Playback Volume Main Volume
27 28
30
Limiter
+6
+3
29
0
-5
-10