Installing The Power-Connector Port - Dell Latitude E5450 Owner's Manual

4. Disconnect the power-connector port cable from its connector [1] and remove the power-
connector port from the computer [2].

Installing the power-connector port

1. Insert the power-connector port into its place on the computer.
2. Place the metal bracket on the power-connector port and tighten the screws to secure the power-
connector port to the computer.
3. Route the power-connector port cable to its routing channels and connect the power-connector
port cable to its connector on the system board.
4. Install the:
a. battery
b. base cover
5. Follow the procedures in After Working Inside Your Computer.
23