Method Of Attachment - Sony DCR-SR32E Service Manual

Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
THE METHOD OF ATTACHMENT OF FP-610 FLEXIBLE BOARD AND FP-621
FLEXIBLE BOARD
1 Fold dotted line parts of the FP-610 flexible board
as shown in figure.
Fold
Adhesive tape
Fold
2 Pass the FP-610 flexible board through
the flexible clamp.
3 Install the flexible clamp in the hinge assy.
Flexible clamp
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_L2
Adhesive tape
Fold
Adhesive tape
Adhesive tape
Flexible clamp
Hinge assy
HELP
4 Roll the the FP-610 flexible board 1.5 times,
in the direction of arrow A
5 Put the adhesive sheet and FP-610 flexible
board on the hinge assy according to the
position of the boss.
.
A
Boss
Adhesive tape
HELP