Voice Command - Philips Digital Desktop 9750 Instruction Manual

Operating instruction
Special Function – Hands Free Dictation with Digital Desktop LFH 9750
Dictation functions with the foot control
Optionon B – using conference microphone LFH172
Preparations
1. Connect the foot control plug to the socket „FOOTSW" on the back of the device.A switch is located on
the underside of the foot control – set this to position „N".
2. Connect the conference microphone LFH 172 (optional) to the „CONF.REC." socket on the back of the
device.
3. Press and hold both buttons „DOWNLOAD" + „SKIP/FWD" while pressing the middle pedal of the foot
control.
4. „HF" (hands-free) now appears in the upper left of the LCD display.The dictation device is ready for
recording and can be operated as described on the previous page (see left).
Transcription
Playback with the standard functions of the LFH 9750:
You can play audio files through the built-in speaker or through headphones.To start the
the STOP/PLAY button
playback stops automatically.
You can adjust the volume
corresponding sliders on the device.
Fast forward and fast rewind:
The DDT 9750 allows you to fast forward the recording by pressing the
the end of the file is reached, you will hear a beep and the fast forwarding stops automatically.
For fast rewind, hold down the
hear a beep and the fast rewinding stops automatically.
Skip forward/back:
You can move between files with the skip function of the DDT 9750. For „
button or move the jog dial to the right to skip to the end of the current file.Then pressing the SKIP/FWD
button or moving the jog dial will always move to the end of the next file.
For „ backward ", press the SKIP/BACK button or move the jog dial to the left. – This will move you to the
start of the file(s).
Automatic backspace:
You can set the value for the automatic backspace during playback of a dictation with the ABS slider
( ), this means:
• Playback does not begin where the dictation was stopped, rather a few seconds earlier.
• To turn off the automatic backspace, set the slider to 0.

Voice Command

. Press it again to stop the playback.As soon as the end of the file is reached, the
(VOL), tone (TONE) and
SKIP/BACK button
(optional):
speed (SPEED) during playback using the
SKIP/FWD button
.As soon as the start of the file is reached, you will
forward
playback , press
.As soon as
", press the SKIP/FWD