Table of Contents
Advertisement
SET
1)
1)
Clip information
Displays clip properties.
2)
Storage device information
TYPE S device
SERIAL:
P2 card serial number
MODEL:
P2 card model name
SELECTED
A check mark
PART.:
partition.
SELECTED
This indication appears only when multiple
PART. No.:
partitions are selected and a list of numbers of
selected partitions is displayed.
NUMBER
Partition no. (1 - )
(NO.):
DATE / TIME:
Date and time of partition recording
VERIFY:
Verify setting and result of verification
ON:
FINISHED
ON:
FAILED
OFF:
NAME:
User assigned partition name
SIZE / USED /
Total storage device capacity/used capacity/
FREE CAP.:
remaining capacity
FAT formatted device
SELECTED
A check mark
PART.:
partition.
SELECTED
This indication appears only when multiple
PART. No.:
folders are selected and a list of numbers of
selected folders is displayed.
34
Main Mode: Thumbnail Screen
EXIT
2)
appears for the selected
Verification was successful
Verification failed
• "- -" is displayed on P2
store.
No verification was
performed
appears for the selected
NUMBER
Folder no. (1 - )
(NO.):
DATE / TIME:
Date and time of folder created
FOLDER:
Folder name
SIZE /
Storage device capacity/remaining capacity
FREE CAP.:
1
*
: Date created is not shown for root.
◆ NOTE:
• Use the SHIFT and +/- buttons to move to thumbnail displays on
adjacent partitions or folders without returning to the EXPLORE
screen.
• Change the thumbnail screen display as necessary. These
changes are performed in the same way as when using P2
cards. (➝ "Changing Thumbnail Display" page 12)
• There is a limit of 1000 clips and clips that exceed this limit will
not be displayed.
Viewing Clip Information
Use the steps below to view a variety of meta data on clips
stored on a storage device. It shows information in the same
way as the P2 card clip property.
1.
Move the cursor to select a clip in a thumbnail screen
on a storage device.
2.
Press the MENU button.
3.
Use the Up/Down/Left/Right cursor buttons to
choose the PROPERTY - CLIP PROPERTY menu
setting and press the SET button.
(➝ "Viewing and Revising Clip Information" page 20)
But repairs cannot be made.
Deleting Clips
Use the steps below to delete clips that are no longer
necessary on a storage device.
1.
Select a clip to delete on the thumbnail screen on a
storage device.
2.
Press the MENU button.
3.
Use the Up/Down/Left/Right cursor buttons to
choose the OPERATION - DELETE menu setting
and press the SET button.
4.
Select YES in the confirmation message that
appears and press the SET button.
◆ NOTE:
• It may not be possible to delete clips with the
indicator) and
(unknown clip indicator).
*1
(bad clip
Hide quick links:
Advertisement
Table of Contents
