Daily Check Of The Cooling System; Engine Coolant Capacity (Typical) - Yanmar 2TNV70 Operation Manual

7. Run the engine until it is at operating
temperature. Check the level of engine
coolant in the reserve tank. When the engine
is running and the engine coolant is at normal
temperature, the coolant level in the tank
should be at the FULL (HOT) mark
(Figure 5, (6)). If the engine coolant is not at
the FULL (HOT) mark (Figure 5, (6)), add
additional engine coolant to the reserve tank
to bring the level to the FULL (HOT) mark.

Daily Check of the Cooling System

1. Check the level of engine coolant in the
reserve tank. When the engine is cold, the
level in the tank should be at the LOW COLD
mark (Figure 5, (4)).
2. Add additional engine coolant to the reserve
tank if necessary.
3. Check the radiator hoses for cracks,
abrasions, cuts or other damage. Replace as
necessary.
TNV Operation Manual
BEFORE YOU OPERATE

Engine Coolant Capacity (Typical)

Note: Capacities listed are for the engine
only without a radiator. Refer to the
operation manual provided by the
driven machine manufacturer for actual
engine coolant capacity on your
machine.
The following are the engine coolant capacities
for various Yanmar TNV engines.
Engine Coolant Capacity
Engine Model
2TNV70
3TNV70
3TNV76
Engine Coolant Capacity
Engine Model
3TNV82A
3TNV84, 3TNV84T
3TNV88
4TNV84, 4TNV84T
4TNV88
4TNV94L
4TNV98, 4TNV98T
4TNV106,
4TNV106T
Engine Coolant
Capacity
0.6 qt (0.6 L)
1.0 qt (0.9 L)
1.0 qt (0.9 L)
Engine Coolant
Capacity
1.9 qt (1.8 L)
2.1 qt (2.0 L)
2.1 qt (2.0 L)
2.9 qt (2.7 L)
2.9 qt (2.7 L)
4.4 qt (4.2 L)
4.4 qt (4.2 L)
6.3 qt (6.0 L)
43