Canon PIXMA MX310 Service Manual page 9
Hide thumbs
Also See for PIXMA MX310:
- Quick start manual (131 pages) ,
- Setup instructions (2 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
##769
TX
##770
TX
##772
TX
##773
TX
##774
TX
##775
TX
##777
TX
##778
TX
##779
TX
##780
TX
##782
TX
##783
TX
##784
TX
##785
TX
##787
TX
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting PPS-EOP in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed.
After transmitting EOR-NULL in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting EOR-NULL in ECM transmission, DCN has been
received.
After transmitting EOR-NULL in ECM transmission, re-transmission
of the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting EOR-NULL in ECM transmission, ERR has been
received.
After transmitting EOR-MPS in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting EOR-MPS in ECM transmission, DCN has been
received.
After transmitting EOR-MPS in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting EOR-MPS in ECM transmission, ERR has been
received.
After transmitting EOR-EOM in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting EOR-EOM in ECM transmission, DCN has been
received.
After transmitting EOR-EOM in ECM transmission, re-transmission of
the procedure signal has been attempted the number of specified
times but failed, or T5 time-over (60 sec.) has occurred.
After transmitting EOR-EOM in ECM transmission, ERR has been
received.
After transmitting EOR-EOP in ECM transmission, no significant
signal has been received, and re-transmission of the procedure
signal has been attempted the number of specified times but failed.
After transmitting EOR-EOP in ECM transmission, DCN has been
received.
(9/32)
Hide quick links:
Advertisement
Table of Contents
