Krell Industries Integrated Transport & Processor KPS-30i Owner's Reference Manual page 15

Q. Do you recommend the use of cones or other damp{ng feet on the KPS-30i?
A. The KPS-30i doesn't require additional isolation. However, you may
experiment with after market feet, providing they do not conflict with
KRELL's warranty stipulations.
Will the KPS-30i play CD singles?
Yes, the KPS-30i can play CD singles with the use of an adapter ring. CD
adapter rings can be purchased at most quality audio stores.
Q. I have an after market jitter reduction device. Should I use it with the KPS-30i?
A. No. In the KPS-30i transmission
jitter between the transport and the
processor is zero. External sources are connected through our own jitter
reduction module which reduces jitter to the lowest possible levels.
I have a special audiophile clamp that I used on my previous CD transport.
Should I use it on the KPS-30i?
A. No. The clamp supplied
with the KPS-30i is specially designed to couple
with the spindle motor hub and is optimized for the transport utilized in the
machine. Other clamping mechanisms may damage or substantially hinder
sonic performance capabilities.
15