Table of Contents
Advertisement
KPS-30i
INPUT
AND OUTPUT
DETAILS
This is a description
of the inputs
and outputs
of the KPS-30i.
Please
contact
your KRELL dealer
or the KRELL staff
for assistance
ff there
are any
questions
not covered in this
Reference.
Please refer
to the KPS-30i Typical
System Setup illustration
on page 16.
CAUTION: When making connections
to this
component or any other,
make sure
the power amplifier
is OFF and the preamplifier
is in the MUTE or STANDBY
mode.
ANALOG OUTPUT CONNECTIONS
The KPS-30i is equipped with two analog output
configurations:
Single-ended
via RCA connectors,
and balanced via XLR connectors.
If your preamplifier
has
high level
balanced
inputs,
we recommend the balanced
outputs
be used. There
are considerable
sonic benefits
to be gained with use of the balanced format.
The XLR pin configuration
is described
below.
Pin I
Ground
Pin 2
Non-inverting {0
°)
Pin 3
Inverting ( 180
°)
The left
and right
channel
RCA and balanced
outputs
are labeled
on the back
panel.
Care should
be taken
that
the
correct
left/right
orientation
is
maintained.
NOTE: These two outputs
can be used to simultaneously
feed different
systems,
I0
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
