Back Panel Description - Krell Industries S-1000 Instructions For Use Manual

Back Panel Description

See Figure 3 on page 14
FUNCTIONS
Analog Audio Outputs
and Inputs
Digital Audio Inputs
and Outputs
16
The back panel of the S–1000 Surround Preamp/processor provides
all audio and video input and output connections, remote control
inputs and outputs, power on and off, and power connection. The
back panel functions are described below.
34 Balanced Analog Audio Outputs
The S–1000 is equipped with eight balanced analog audio chan-
nel outputs, with XLR connectors, for the left, center, subwoofer,
surround left, surround right, back left, and back right.
35 Single-ended Analog Audio Outputs
The S–1000 is equipped with eight single-ended analog audio
channel outputs, with RCA connectors, for the left, center, right,
subwoofer, surround left, surround right, back left, and back right.
36 Balanced Analog Audio Inputs
The S–1000 is equipped with one set of balanced inputs with
XLR connectors.
37 Tape In Left and Right
The S–1000 is equipped with one set of single-ended tape
inputs with RCA connectors.
38 Tape Out Left and Right
The S–1000 is equipped with one set of single-ended tape out-
puts with RCA connectors.
39 VCR In Left and Right
The S–1000 is equipped with one set of single-ended inputs
with RCA connectors, for a VCR audio source.
40 VCR Out Left and Right
The S–1000 is equipped with one set of single-ended outputs
with RCA connectors, for a VCR audio source.
41 Single-ended Analog Audio Inputs
The S–1000 is equipped with seven sets of single-ended inputs
with RCA connectors.
42 7.1 Audio Inputs
The S–1000 is equipped with eight single-ended 7.1 analog pass-
through inputs for multichannel SACD and DVD audio devices.
43 Optical Digital Audio Inputs
The S–1000 is equipped with four optical digital EIAJ inputs with
TosLink connectors.
Krell S–1000