Listening Room Setup - Krell Industries HTS 2 Instructions For Use Manual

After selecting the appropriate option for your speakers, press enter (83), highlight OK,
and press enter (83) again. You return to the speaker system setup menu. The on-
screen phrase for the selected speaker now reads LIMITED or
FULL-RANGE.
2. LISTENING ROOM SETUP
The second main menu screen, listening room setup, allows you to tell the Home
Theater Standard the exact location of each speaker in your system, so that the Home
Theater Standard can calculate the proper arrival and delay settings.
KRELL HTS
-MAIN MENU-
CONFIGURE SPEAKERS
I~I~ LISTENING ROOM SETUP ~
CALIBRATE VOLUME
CONFIGURE DEVICES
CONFIGURE LEVEL ADJUSTMENT
OPERATION
Use the 1" $ keys (80) to highlight LISTENING ROOM SETUP and press enter (83).
LISTENING ROOM SETUP
screen appears:
KRELL HTS
-LISTENING ROOM SETUP-
LEFT CENTER RIGHT
0 FT ~ 0 FT 0 FT
L REAR SUB R REAR
0 FT 0 FT
0 FT
Use the ~ key (80)
procedure to input the
set the selection.
When you access the LISTENING ROOM SETUP screen, the cursor is blinking at the LEFT
speaker. Press enter (83), then use the ~ key (80) to increase the number to the correct
distance (in feet, up to 30 feet) from the main listening position to the left speaker. Press
enter (83) again to set the selection.
highlight the 0 FT under
CENTER.
Press enter (83). Use the same
correct distance for the center speaker. Press enter (83) again
Do the same for the remaining speakers in the system. After all the distances are set,
press the previous key (79) to return to the main menu.
Krell Home Theater Standard 29