Bailey Approach Advance Owner's Manual page 50

interior lights.
Note: If the master switch is off, this button will
not function.
Pump Switch
When pressed will enable/disable the water
pumps. Holding this button will force the
internal pump to run.
Note: If the master switch is off, this button will
not function.
Note: See "Notifications and Warnings" section
for pump running notification.
Awning Switch
When pressed will switch power to the awning
light.
Note: If the master switch is off, this button will
not function.
Navigation Buttons
Use and buttons to navigate up and down
through menus.
Press to enter function or change settings
(if further settings are available).
Menus
Home
The home screen is displayed by default. The
control panel will return to the home screen
when left idle. The home screen displays the
time as well as any relevant notifications or
warnings that are present.
Setting the time:
1. On the home screen, hold
until the hours begin to flash.
2. Keep pressing or to change hours.
3. Press to set hours, minutes will now flash.
4. Keep pressing
5. Press to finish.
Whale Space Heater
This control panel has been designed to
integrate Whale appliances into a single control
panel. To turn the heater off/on press
screen will display either the word off or the
thermostat setting.
mode press and hold
begin to flash. Press
mode between the following options:
Icon Mode
2000W
1000W
500W
Off
Fan Only
or Gas
for 3 seconds
FITTED EQUIPMENT – The Control Panel
or to change minutes.
On all gas settings a filled flame
that the gas is currently burning. An
. The
flame
burning. A flame icon
To change the heating
also indicate that a gas appliance is currently
in use.
and the mode icon will
Once the intended mode is selected press
or to change the
to set the mode and move on to thermostat
temperature selection.
room temperature with the
Description
and press
Heat boost electric
Note: Please consult the Whale user manual
setting
for more detailed information on each mode.
Intermediate heat electric
Whale Water Heater
setting
To turn the heater off/on press
screen will display either the word off or the
Quiet/ night time electric
thermostat setting.
setting
mode press and hold
begin to flash. Press
Heater off position
mode between the following options:
This control panel has been designed to
Air circulation setting, no
integrate Whale appliances into a single control
heat output
panel. To turn the boiler off/on press
screen will display either the word off when the
boiler is off. To change boiler mode press and
hold
Gas only setting
Press
following options:
Heat Uses gas and electric
Boost simultaneously for higher
Or
Setting heat outputs.
shows that gas is selected but not
on the homepage will
Select the desired
and
to save.
To change the heating
and the mode icon will
or to change the
and the mode icon will begin to flash.
or to change the mode between the
represents
empty
buttons
. The
. The
6