Input Level Trim; Input Name - Krell Industries EVOLUTION Evolution 202 Owner's Reference Manual

(SECTION SEVEN: Customizing the Evolution 202 continued)

Input Level Trim

Input Name

Input Name Options
AUX, AUX1, AUX2, AUX3
B-1, B-2, B-3, BYPC-1
C-2, C-3, CABLE, CD, CD1,
CD2, CD-R, COMP
DAC, DAT, DCC, DISC, DISC 1,
DISC 2, DISC 3, DSS, DVD,
DVD1, DVD2, DVD3, DVD-A
EQ, GAME, HI-8
LD, LD1, LD2, LINE 1, LINE 2,
LINE 3, LINE
MDISC, MIXER, MON
PHONO, PHON1, PHON2,
PROC
S-1, S-2, S-3, S-4, SACD, SAT,
SRC1, SRC2, SRC3, SURR,
S-VID
TAPE1, TAPE2, TAPE3, TAPE,
TEST, THR, TUNER, TUNR1,
TUNR2, TV,
VCR, VCR1, VCR2, VCR3,
VDISC, VIDEO, VID1, VID2,
VID3
8MM, 8TRK
This function enables you to select an input offset for a particular input. The
options are: in 1 dB increments
+/-6 dB,
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or the up and down
keys (14) on the remote control to select:
2.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control The front panel display (3) shows the default mode:
.
3.
Use the level control knob or the up and down keys to select the desired input:
B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.
4.
Press the enter button or key. The front panel display shows the default mode:
0 dB.
5.
Use the level control knob or the up and down keys to select the desired trim
option: in 1 dB increments.
+/-6 dB,
6.
Press the enter button or key to confirm the selection. The front panel display
shows the selected input.
This function enables you to select an input name for each input. The input name
options are listed in the left margin, on this page.
Enter the menu, then:
1.
Use the level control knob on the preamplifier front panel or up and down keys
(14) on the remote control to select:
2.
Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control The front panel display (3) shows the default mode:
.
3.
Use the level control knob or the up and down keys to select the desired input:
B-1, B-2, S-1, S-2, S-3, C-1, C-2, or TAPE.
4.
Press the enter button or key. The front panel display shows no characters.
5.
Use the level control knob or the up and down keys to select the desired input
name, from the input name options listed at left.
6.
Press the enter button or key to confirm the selection and return to the input
list, in Step 3. The front panel display shows the input name.
To select input names for other inputs, repeat Steps 3 and 4.
.
INPUT LEVEL TRIM.
INPUT NAME.
34
B-1.
B-1.