Nokia NHM-8NX Series Troubleshooting Instructions page 53

PAMS Technical Documentation
later.
1 Select the modulation 1, 0 or random in Tx Data Type. Select random if a GSM
tester is used. Then it can synchronise to the burst.
2 Select Tx PA Mode High
3 Tune the highlighted values to the wanted power (Use average burst power)
4 Tune base level to –28dBm (Close to lowest level CMD55 can keep synchronisa-
tion)
Issue 1 05/02
ãNokia Corporation
NHM-8NX
Troubleshooting Instructions
Page 53