PAMS Technical Documentation
1 The existing data in the phone is shown
2 Calibrate, and the new data is shown
3 Stop, and the little window pops up where you can select to save or not
4 Select GSM1800 in the top bar and repeat at channel 700
1 The existing data in the phone is shown
2 Calibrate, and the new data is shown
3 Stop, and the little window pops up where you can select to save or not
RX channel select filter
1 Select Maintenance, Tuning, Rx Channel Select Filter Calibration
2 Press Start and you can select to load values from the phone or not
3 Press AutoTune
Issue 1 05/02
ãNokia Corporation
NHM-8NX
Troubleshooting Instructions
Page 49