Quick Start - Sharper Image CA848 Instructions Manual

1. Plug the appliance into a polarized wall outlet.
2. Slide the POWER switch located above the handle to the ON
position. The power indicator light will illuminate. Allow unit
to heat up for several minutes.
3. Open the iron. Place a section of hair no more than 1" wide
and 1/2" thick between the two hot plates, close to the scalp.
4. Squeeze the plates firmly together and slide the appliance
down the length of the hair section. At end, release pressure
so hair slides out.
5. Repeat process on additional sections of hair until the desired
hairstyle is achieved.
The Salon Hair Straightener is intended for household use. Use
on alternating current (50/60Hz) between 120 volts AC and 240
volts AC.
Note: This appliance has Automatic Worldwide Voltage. It will
automatically adjust to the proper voltage if outfitted with a cor-
rectly configured adapter plug (not included) prior to plugging
into outlet.

QUICK START

INSTRUCTIONS