Switching On The Tv And Automatically Tuning - Sony KV-14LT1B Service Manual

Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screen appear on the TV enabling
you to: 1) choose the language of the menu screen, 2) choose the country in which you wish
to operate the TV, 3) search and store all available channels (TV Broadcast) and 4) change
the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change the language menu, change or repeat the tuning (e.g. when
you move house) or rearrange again the order of the channels afterwards, you can do that
by selecting the appropriate menu in the
"Menu Guide" section of this instruction manual. You can also do that by pressing the
Auto Start Up Button on the TV set.
1
Connect the TV plug to the mains socket (220-240V AC,
50Hz)
Press the on/off button on the TV set to turn on the TV.
The first time you press this button, a Language menu
displays automatically on the TV screen.
2
Press the or button on the remote control to select
the language, then press the OK button to confirm your
selection. From now on all the menus will appear in the
selected language.
3
The Country menu appears automatically on the TV
screen. Press the or button to select the country in
which you will operate the TV set, then press the OK
button to confirm your selection.
Select "-" instead of a country
• If the country in which you want to use the TV set
does not appear in the list.
• If you do not want your channels (TV Broadcast)
stored in a given channel sequence starting from
programme position 1.
4
The Auto Tuning menu appears on the screen. Press the
OK button to select Yes .
The operating instructions mentioned here are partial abstracts from the 'Operating
Instruction Manual'. The page numbers of the 'Operating Instruction Manual' remain
as in the manual.
(Set Up). For more information, refer to the
Language
English
Español
Français
Italiano K
Magyar
Nederlands
Select Language:
OK
Country
-
Бългapия
Česká rep.
Magyarország K
Polska
România
Select country:
OK
Do you want to start
automatic tuning?
Yes
K
No
OK
continued...
7
First Time Operation
5
A new menu appears on the screen asking you to check
that the aerial is connected. Ensure the aerial is connected
and then press the OK button to start the automatic
tuning.
The TV starts to automatically search and store all
available channels (TV Broadcast) for you.
This procedure could take some minutes. Please be
patient and do not press any button. Otherwise the
automatic tuning will not be completed.
6
After all available channels are captioned and stored,
the Programme Sorting menu appears automatically
on the screen enabling you to change the order in
which the channels appear on the screen.
a)
If you do not wish to change the channel order, go to
step 7.
b)
If you wish to change the channel order:
GB
1 Press the or button to select the programme
number with the channel (TV Broadcast) you wish
to rearrange, then press the
2 Press the or button to select the new
programme number position for your selected
channel (TV Broadcast), then press
3 Repeat steps b)1 and b)2 if you wish to change
the order of the other channels.
7
Press the MENU button to remove the menu from the
screen.
Your TV is now ready for use
8
First Time Operation
Please confirm that
aerial is connected
Confirm
OK
K
Auto Tuning
Programme: 01
System: B/G
Channel: C21
Searching...
Programme Sorting
Programme:
01 TVE
02 TVE2
03 TV3
K
04 C33
05 C27
06 C58
Select channel:
OK
Exit:
MENU
Programme Sorting
Programme:
01 TVE
button.
02 TVE2
K
03 TV3
04 C33
05 C27
06 C58 05 C27
Select new position:
OK
Exit:
MENU
.
MENU
MENU