How To Program A Track Sequence; How To Change A Programmed Track Sequence - Krell Industries Front Loading Compact Disc Player KAV-280cd Instructions For Use Manual

How to Program
a Track Sequence
This short-term programming lets you store a maximum of twenty
tracks in a program sequence.
1. Use the direct track access keypad or the track forward and back
keys to select a track.
2. Press the program key to store the selected track. The front
panel display shows PROGRAM 1 for the programmed track and
the total track length.
3. Use the direct track access keypad or the track forward and back
keys to select the next track. The front panel display flashes PRO-
GRAM until you press the program key. The front panel display
shows 2 and the total program time.
4. Repeat this procedure for each of the tracks you wish to store. A
maximum of twenty tracks can be programmed in sequence.
5. Press the play key to begin playback of the tracks in the program
sequence.
Note
Track forward, track back, and repeat function normally within a
programmed sequence.
How to Change
a Programmed
Track Sequence
Note
TO ADD TRACKS
TO THE PROGRAM
1. While the compact disc is playing, press the stop key.
2. Press the program key. The front panel display cycles through
the programmed track numbers once.
You can select a track anytime during the cycle, or after the front panel dis-
play has stopped cycling.
To add or delete tracks, first stop compact disc playback and press
the program key, as noted above. Then follow the steps below to add
or delete tracks:
Press the track number you wish to add on the direct track access
keypad, then press the program key. The newly programmed track is
placed at the end ofthe existing track seq uence.
16 Krell KAV-280cd