5-4: Audio Track Name - Korg TRINITY HDR-TRI User Manual

Sequencer P5
5–4: Audio Track Name
5–4j
5–4j: Audio Track Name
Page Menu Command
5–4B: Automation Edit
5–4C: Erase Audio Track
5–4D: Copy Audio Track
5–4E: Erase Measure
44
Here you can assign a name to each audio track.
Use the text edit button to assign a name to the audio track.
The audio track name is displayed in the various tab pages of Sequencer mode
P1, P2, and P5.
This command lets you edit individual mixer events that were recorded. Event
editing of an audio track can be done using "5–3J: Audio Event Edit."
For details on the procedure, refer to "5–3B: Automation Edit."
This command erases all playback data from the audio track selected in the tab 3
page.
For details on the procedure, refer to "5–3C: Erase Audio Track."
This command copies playback data from the audio track selected in the dialog
box to the audio track specified in the tab 3 page.
Be aware that when you execute the Copy Audio Track command, all playback
data that previously existed in the copy destination track will be erased.
For details on the procedure, refer to "5–3D: Copy Audio Track."
This command erases specified measures of playback data from the track
selected in the tab 3 page.
You can specify the type(s) of data that will be erased.
Unlike the Delete Measure command, executing the Erase Measure command
will not cause playback data following the erased area to be moved toward the
beginning of the song.
Page Menu
5–4B
5–4C
5–4D
5–4E
5–4F
5–4G
5–4H
5–4I
5–4J