Table of Contents
Advertisement
21. Press to highlight the Step No. 00, and use the 56value keys or the DIAL to move to the step (s) you
want to edit, then make edits for each step by highlighting and changing the Pitch Offset, Gate,
Velocity and Flam parameters.
22. If you want to add or remove Tones along the Step grid, move to the desired step, then use the
Numeric keys and ENTER key to toggle tones off and on for each step.
Tip:
While editing a pattern, check the Latch box in the GLOBAL (P6) Pattern Setup page, to latch the
pattern so that you can continuously - hear the tone and step edits your making - hands-free!
Tip:
You'll find lots more information about working with, and editing arpeggio patterns in the TRITON
Owner manuals!
Tips On Using the Arpeggiators in Combination Mode
1. Select and Play Combination C097 Bumpin' & Thumpin'...
"Question: I hear the drum arpeggio pattern, but when I play the keys - no drum
sounds are triggered - what's up with that?
Good Question! Even though you see a drum Program assigned as one of the timbres in this Combination,
it's only assigned to trigger a specific arpeggio pattern, and isn't audible when you touch the keyboard. This
way, you're free to play while the arpeggio pattern provides the rhythm.
Here's why it works this way:
2. Press the MENU key, then press P2: Edit -Trk Param.
3. Press the MIDI Channel tab button (lower-left). Notice the Gch (Global Channel 1) setting for all the
timbres in the Combination - except for Timbre 4 - Drums - it's MIDI channel is set to 2. Also note that
the status for timbres 6,7 and 8 is set to Off - meaning these three timbres won't be heard when you play
the keyboard. Keep this in mind for a moment...
74
TRITON Training Guide
Hide quick links:
Advertisement
Table of Contents
