Korg TRITON Musical Instrument User Manual page 14

8> Mode keys:
will light. Seven modes of operation are available
9> COMPARE key:
Combination modes, as well as comparing when recording and editing in Sequencer mode.
10> VALUE Slider / keys, DIAL, Numeric keypad,10's HOLD and ENTER keys:
used to set and modify values. Use the Numeric keypad when you know the value you want to enter, or
when you want to direct-select Programs, Combinations or Songs. The 10's/HOLD key lets you enter values
with a decimal point, or advance Programs and Combinations by 10's. The display will indicate "10's Hold"
when on, and you can press the 5
confirms a value you input on the Numeric keypad. You can also hold down the ENTER key and press a
Numeric key to select page menu commands in the current page.
11> Touchview:
end of this section!
12> EXIT key:
the first page of that mode (P0). You can also press the EXIT key to close dialog boxes, popup menus and
page menus.
13> MENU key:
makes it easy to "Jump" to a desired page posted in the display. You can also hold down the MENU key and
press a Numeric key to select a page.
14> SEQUENCER keys:
down the <<REW and FF>> keys will rewind or fast-forward the current song while in playback. The
LOCATE key is used to return a song or Cue list to a specified point, and can also be used as a MIDI "panic"
button for stuck notes.
15> SEQUENCER /SAMPLING keys:
as well as "arming" the sampling function. Press this key before pressing the START/STOP key. This key
can also be used to quickly-update (write) an edited Program or Combination, or to update (write) the edited
Global mode. The START/STOP keys initiate recording in sequencer mode, and start / stop song playback.
This key's LED will flash in time with the current tempo. In sampling mode, this key will start / stop sampling.
Press these keys to enter a desired mode of operation - the LED's for each mode
Used to compare an un-edited sound with an edited sound when in Program or
5 value key to move from Program A000 to A010, etc. The ENTER key
A Graphic User - Interface so cool we've devoted a special paragraph about it at the
When you are working with pages in a mode, pressing the EXIT key will take you to
Press this key to post a listing of pages in a mode (P0, P1, etc.). The MENU key
The PAUSE, <<REW, FF>> work like tape recorder transport keys. Holding
The REC/WRITE key is used to put the sequencer in standby mode
12
TRITON Training Guide
These controls are