Check After Assembly; Caution - Korg SP 250 User Manual

Place the piano in the location where it will be played. Please be sure to place it over
11
a flat floor, to avoid any shaking.
Note: Be careful not to pinch the power cable under the piano feet.
Tighten and check all the screws.
12

Check after assembly

[•] Are any parts left over?
If any parts are left over, check the diagrams to see where they should be used.
[•] Make sure that all screws are tight.

Caution

Caution when transporting the instrument.
transport them separately. After transportation, refer to these instructions and re-
assemble the piano and stand.
Screw loosening.
loosen as time goes by, causing the stand to wobble. If this occurs, re-tighten the
screws.
If you need to packup the piano, reverse the assembly order by which
Disassembly.
the piano was attached to the stand and the stand was assembled. After disassembly,
save the screws and other parts so that no parts are lost.
Assembling the stand
After assembly, the various screws and bolts of the stand may
Remove the piano from its stand, and
39