Section 1 - Familiarization - Snapper 2812523BVE Safety Instructions & Operator's Manual

Section 1 - FAMILIARIZATION

IMPORTANT: The figures and illustrations in this manual are provided for reference only and may differ from your
specific model. Contact your Snapper dealer if you have questions.
FUEL TANK
TRANSMISSION
SHIFT LEVER
OVERRIDE
CONTROL
DISCHARGE
DEFLECTOR
1.1 INTRODUCTION
This manual has been prepared for the operator's of the
SNAPPER Rear Engine Rider. Its purpose, aside from
recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 thru 4 of this manual and
All SAFETY messages on the Rear Engine Rider and its
attachments before operating.
BLADE LEVER
STEERING
WHEEL
FIGURE 1.1
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER Rear Engine Rider. It is
recommended that all operators of this equipment
become thoroughly
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner's manual. Study
these manuals before operating and keep both handy
for future reference.
6
ENGINE SPEED
CONTROL
IGNITION
SWITCH
CLUTCH/BRAKE
PEDAL
PARK BRAKE
LATCH
BLADE PEDALS
familiar with the controls,