Screen Setup - Sony SLV-D370P Service Manual

QQ
3 7 63 1515 0
Press B/b to select an item.
4
5
Press SET UP to exit the menu.
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Dolby Digital
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off
On
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (COAXIAL) jack only when "Dolby Digital" is set to
"D-PCM".
The default setting is indicated in bold print.
Standard
Wide Range
Notes
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
• Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.
TE
L 13942296513
Press B/b to select an item.
4
5
Press SET UP to exit the menu.
Menu choices
• TV Type
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box
4:3 Pan Scan
16:9
4:3 Letter Box
• Black Level
You can enhance the black level by increasing the brightness and contrast when
viewing DVD VIDEOs with the PROGRESSIVE indicator turned off.
The default setting is indicated in bold print.
Off
On
Notes
• Playback settings stored in the disc take priority over the "DVD SETUP" menu settings and
not all the functions described may work.
www
• Depending on the DVD VIDEO, "4:3 Letter Box" may be selected automatically instead of
"4:3 Pan Scan" or vice versa.
.
http://www.xiaoyu163.com
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Select this when the player is connected to an audio component
with a built-in DTS decoder.
Normally select this positon.
Gives you the feeling of being at alive performance.
Audio Setup
Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
4:3 Pan Scan 16:9
Stops the increase of the contrast.
Increases the contrast.
x ao u163
y
i

Screen Setup

http://www.xiaoyu163.com
2 9
8
Screen Setup
"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
Before you start...
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
1
2
3
Q Q
3 6 7 1 3
55 US 56 US
Screen Setup
To set the "Progressive" setting
If your TV accepts progressive (480p) format signals, you will enjoy accurate color
reproduction and high quality image.
Follow step 1 and 2 on page 56, then press V/v to select
1
"Progressive."
Press B/b to select "On," then press ENTER.
2
3
Follow the instructions appearing on the screen.
1
Ensure your TV is (480p) Progressive Scan capable.
2
Connect with Component Video Output jacks (red/green/
blue connections).
For details, see the connection B on page 30.
Press B/b to select [OK] to test your video signal.
3
4
If video signal appears OK, video connection is complete.
Press ENTER.
The PROGRESSIVE indicator on the unit lights up in orange.
PROGRESSIVE indicator
If picture is distorted, press O RETURN. Check the connection (page 30).
.
continued
57 US 58 US
Screen Setup
1-13
9 4 2 8
Press SET UP when the DVD player is in stop
mode, then press V/v to select
(DVD),
then press ENTER.
Press V/v to select "Screen Setup," then press
ENTER.
Press V/v to select the setup item from the displayed list:
"TV Type," or "Black Level."
To set the "Progressive" setting, see page 58.
1 5 0 5 8 2 9 9 4
m
co
9 9
SET UP
V/v/B/b
ENTER
O RETURN
2 8 9 9