Sony SLV-D370P Service Manual page 13

QQ
3 7 63 1515 0
Audio/video (A/V) hookup
If your TV has audio/video (A/V) input jacks, you will get better picture and sound if you hook
up your DVD-VCR using these connections. If your TV does not have A/V inputs, see the
following pages for antenna or cable hookups. Note that "Advanced Hookups" (page 30)
explains additional hookup methods that will optimize the picture and sound for a true
"hometheater" experience.
If you are not planning to use your DVD-VCR to record programs, you only need to make the
connections shown on this page. If you want to record regular or cable TV programs, complete
these connections first, and then go to the following pages for antenna or cable hookups.
A Use this hookup if your TV has stereo jacks
DVD-VCR
Audio/video cord
(not supplied)
B Use this hookup if your TV does not have stereo jacks
DVD-VCR
Video cord
(not supplied)
Notes
• To play a tape/disc in stereo, you must use the A/V connection.
• If you do not have a stereo receiver, connect the white LINE OUT/AUDIO L jack to the
AUDIO IN jack on your TV.
TE
L 13942296513
C Use this hookup if you have no cable box, or a cable box with only a
few scrambled channels
What you can do with this hookup
• Record any unscrambled channel by selecting the channel on the VCR
What you cannot do
• Record scrambled channels that require a cable box
Wall
Connect this cable
directly to your TV if
you do not have a
cable box.
www
.
http://www.xiaoyu163.com
Stereo receiver
TV
Audio cord (not supplied)
Stereo receiver
TV
Audio cord (not supplied)
Basic hookups
DVD-VCR
Rear of TV
VHF/UHF
A Match the type
of connector
on your TV: A,
or
B, or C.
VHF
B
For connector
types B and C,
UHF
or
no UHF
connection is
VHF
required.
Cable box
C
UHF
x ao u163
y
i
Basic hookups
http://www.xiaoyu163.com
2 9
8
Hookup 1 (Plug and Play)
A Use this hookup if you are using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
B Use this hookup if you are using a VHF-only antenna (you get
channels 2–13 only)
If you cannot connect your antenna cable to the DVD-VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the IN connector. If
you have separate cables for VHF and UHF antennas, you should use a U/V band
mixer (not supplied) (page 100).
Q Q
continued
3 6 7 1 3
15 US 16 US
Basic hookups
DVD-VCR setup (Hookup 1 continued)
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR's clock and TV channels when
the DVD-VCR is plugged into the AC outlet.
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To begin using your DVD-VCR, go to "Basic Operations" on page 34.
To change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 20.
The clock is set using a time signal provided by some TV channels. If the clock is
incorrect, or "–:–" appears in the display window, see "Using Manual Clock Set" on
page 24.
To add or disable channels manually, see "Presetting/disabling channels manually"
on page 28.
Notes
• If you connect the AC power cord before the antenna connections are completed, the channels
may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on page 26.
• Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
• Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more
with the DVD-VCR power turned off.
.
continued
17 US 18 US
Basic hookups
1-3
9 4 2 8
Rear of TV
VHF/UHF
A
or
VHF
DVD-VCR
B
UHF
or
VHF
C
UHF
Rear of TV
VHF/UHF
A
or
DVD-VCR VHF
B
UHF
or
VHF
C
UHF
1 5 0 5 8 2 9 9 4
to AC outlet
AC power cord
m
co
9 9
Match the type of
connector on your
TV: A, B, or C.
Match the type of
connector on your
TV: A, B, or C.
For connector
types B and C, no
UHF connection is
required.
2 8 9 9