Functions Specific To The Editor; Utility Commands - Korg M3 User Manual

Functions specific to the editor
These are functions that are not found on the M3, and are available only from the editor (M3
Editor, M3 Plug-In Editor).

Utility commands

Load
Loads editor data that was previously saved on the computer.
Save
Saves data from the editor to your computer as a file.
Note: These functions load or save the data as dedicated files for the editor application.
Receive All
Receives all data from the M3 data into the editor.
Note: The sample data of Sample mode and the sequencer performance data of Sequencer
mode are excepted.
Transmit All
Transmits all data in the editor to the M3 and writes it into internal memory.
Receive All Combi/Current Combi Bank
Receive All Prog/Current Prog Bank
Receive SEQ
Receive Global Data/Drum Kit/Formant Motion/Current Formant
Motion
Receive the correspoding data from the M3 into the editor.
Note: Receive Formant Motion/Current Formant Motion can be used only if the EXB-
RADIAS is installed.
Transmit All Combi/Current Combi Bank
Transmit All Prog/Current Prog Bank
Transmit SEQ
Transmit Global Data/Drum Kit/Formant Motion/Current Formant
Motion
Transmit the correspoding data from the editor to the M3 and writes it.
Note: Receive Formant Motion/Current Formant Motion can be used only if the EXB-
RADIAS is installed.
Receive Current Combi/Current Prog/1 SEQ
Receive the respective data from the M3 into the editor.
26