How To Initialize The Tv/Vcr Combination - Durabrand T6609BK Service Manual

HOW TO INITIALIZE THE TV/VCR COMBINATION

To put the program back at the factory-default,
initialize the TV/VCR Combination as the following
procedure.
1. Turn the power on. (Use main power on the TV
unit.)
2. To enter the Service mode, press [STANDBY/ON],
[2], [7], [1], and [MUTE] buttons on the remote
control unit in that order within 5 seconds.
- To cancel the Service mode, press [STANDBY/
ON] button on the remote control.
3. Press [SLEEP] button on the remote control unit to
start initializing.
- During initializing, OSD indication (digit) on the
four corners on TV screen blinks to white.
- After initializing, OSD indication lights to red.
4. Turn the power off by pressing main power button
on the TV unit, and unplug the AC cord from the
AC outlet.
1-7-1 T6609INT