Getting Started - Alpine INE-W920R Quick Reference Manual

Getting Started

Touch operation
You can operate the system by using the touch panel on the screen.
e
Common onscreen buttons
: Returns to the previous screen. Depending on the function, this button may cancel the operations
performed on the screen.
: Closes the window.
Location of Controls
e
INE-W920R
A
(Release) button (INE-W920R Only)
Use this button to remove the front panel.
B
Remote Sensor
Point the remote control transmitter towards the
remote sensor within a range of 2 meters.
C
(My Favorites) button
The My Favorites screen for registered User 1 is
displayed.
Press and hold this button at least 3 seconds to switch
to User 2.
D
(MAP) button
Recalls the navigation map screen.
E
(PHONE) button
Recalls the Telephone Menu screen.
When a hands-free phone is connected, press and
hold for at least 3 seconds to switch to the call history
screen.
F
(AUDIO) button
Displays the Audio/Visual screen. If the Audio/Visual
screen is already displayed, changes the source.
INE-W920R: Press and hold AUDIO for at least 3 seconds
to activate the "Setting the Balance/Fader/
Subwoofer" mode.
INE-W928R: Press and hold for at least 3 seconds to turn
the power off.
Owner's manual Touch operation, Location of Controls, Turning Power On or Off
e
INE-W928R
G
Rotary encoder/MUTE/C button (INE-W920R
Only)
Adjust the volume by turning to the left or right.
Press to activate /deactivate the mute mode.
Press and hold for at least 3 seconds to turn the power
off.
c (Eject) button
H
INE-W920R: Ejects a disc.
INE-W928R: The Open/Tilt screen is displayed.
I
/ (UP/DOWN)button (INE-W928R Only)
Press to adjust the volume.
J
MUTE button (INE-W928R Only)
Press to activate /deactivate the mute mode.
Press and hold MUTE for at least 3 seconds to activate
the "Setting the Balance/Fader/Subwoofer" mode.
K
RESET switch
The system of this unit is reset.
3
-EN