Yamaha A-S3000 Owner's Manual page 16

Connections
Speakers A
(R channel)
+ -
+
Speakers B
(R channel)
Caution
• Do not let the bare speaker wires touch each other or do not let
them touch any metal part of this unit. This could damage this
unit and/or the speakers.
• All connections must be correct: L (left) to L, R (right) to R,
"+" to "+", and "–" to "–". If the connections are faulty, no
sound will be heard from the speakers, and if the polarity of the
speaker connections is incorrect, the sound will be unnatural
and lack bass. Also, refer to the owner's manual for each of
your components.
16
En
Turntable
Ground
SPEAKERS R CH
A OR B:4 MIN./SPEAKER A + B:8 MIN./SPEAKER
-
Tuner
GND PHONO
TUNER CD
ATTENUATOR
BYPASS
SYSTEM CONNECTOR REMOTE TRIGGER
IN OUT
CD player with
RCA jacks
• Use RCA unbalanced cables to connect other components
except speakers. Use XLR balanced cables to connect a CD
player or network player with XLR balanced output jacks to the
BAL 1 or BAL 2 jacks of this unit.
• Connect your turntable to the GND terminal to reduce noise in
the signal. However, you may hear less noise without the
connection to the GND terminal for some turntables.
BAL 1 BAL 2
PHASE ATTENUATOR PHASE
ATT. NORMAL INV. BYPASS ATT. NORMAL
(-6dB) (-6dB)
AC IN
IN
CD player with
XLR jacks
AUTO POWER STANDBY
ON OFF
LINE
NORMAL
INV.
+HOT
2 1
3
- COL