Installing The Hall Sensor; Removing The Coin-Cell Battery - Dell Latitude E6230 Owner's Manual

Installing the Hall Sensor

1. Replace the hall sensor in its slot.
2. Tighten the screw to secure the hall sensor.
3. Route and connect the hall sensor cable.
4. Install the:
a) base chassis
b) speakers
c) heat-sink fan
d) bluetooth module
e) keyboard
f) palmrest
g) base cover
h) battery
i) ExpressCard
j) SD card
5. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove the:
a) SD Card
b) ExpressCard
c) battery
d) cover
e) palmrest
f) keyboard
g) bluetooth module
h) heat-sink fan
i) speakers
j) base chassis
3. Disconnect the coin-cell battery cable.
After Working Inside Your Computer .
Before Working Inside Your Computer .
31