Table of Contents
Advertisement
Wireless/Remote off-camera flash is used as follows:
1
Wireless/Remote off-camera flash photography with a program
flash unit attached to the camera, and the camera supplying the
flash signal.
This illustration shows a single-
lens reflex camera. The digital
camera is used in exactly the
same way.
2
Wireless/Remote off-camera flash photography with the Wireless
Remote Flash Controller (separately available) supplying the flash
signal.
This illustration shows a single-
lens reflex camera. The digital
camera is used in exactly the
same way.
FLASH
The 5400HS or 5400xi programm flash units
must be attached to the camera for
Wireless/Remote off-camera flash photography
(ie two program flash units are required).
See the 5400HS or 5400xi manual for details.
• The 5400xi manual shows the Dynax 9xi
body, however it may also be used with this
camera. The AE-lock button is used for test
illumination with the Dynax 9xi, however the
SPOT button is used for this purpose with
this camera.
The Wireless Remote Flash Controller may be
attached to the camera in place of the built-in
flash for Wireless/Remote off-camera flash
photography. Using the Wireless Remote Flash
Controller allows illumination with two or more
distant programm flash units, and proportional
illumination control of each.
See the Wireless Remote Flash Controller
manual for details.
• The Wireless Remote Flash Controller is sold
as a Dynax 9xi accessory, however it may
also be attached to this camera. The AE-lock
button is used for test illumination with the
Dynax 9xi, however the SPOT button is used
for this purpose with this camera.
86
Advertisement
Table of Contents
