Wireless Wan Device - Toshiba TECRA A50-A User Manual

3.
4.
5.
6.
1. Battery lock
2. Battery release latch
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1.
2.
3.

Wireless WAN Device

Some computers in this series are equipped with the Wireless WAN
device. This device gives you the ability for a high-speed connection to the
Internet, corporate intranet, and your email while you are away from the
office.
User's Manual
Remove all cables and peripherals that are connected to the
computer.
Close the display panel and turn the computer upside down.
Slide the battery lock into its unlocked ( ) position.
Slide and hold the battery release latch to disengage the battery pack
and then lift it up to remove it from the computer.
Figure 4-7 Releasing the battery pack
1
1
Insert the battery pack as far as it will go into the computer.
Ensure that the battery pack is securely in place and the battery lock is
in its locked position.
Turn your computer over.
3
3
2
3. Battery pack
2
4-28