PRS-950
2-9.
CARD ASSY (FOX MINIATURE) (WW1)
Note: When the WWAN antenna cable is removed, refer to "Wi-Fi OPERATION CHECK" (page 3).
2-10. WWAN ANTENNA (ANT1)
Note 1: When the WWAN antenna is removed, refer to "Wi-Fi OPERATION CHECK" (page 3).
1 sheet (antenna)
Note 3: When pasting sheet (antenna), please let me
4 Peel the adhesive.
5 WWAN antenna
(ANT1)
3 Peel the aluminum tape.
Note 4: When pasting aluminum
tape, please let me stick to
MAIN board rubbing on
several times.
8
4 card assy (fox miniature)
(WW1)
– Rear side view (bottom side) –
stick to MAIN board rubbing on several times.
– Rear side view (bottom side) –
1 two new truster screws
(M2)
2
3 WWAN antenna cable
ire ro essi
WWAN antenna cable
Note 2: Please take care not to run aground in the chassis.
chassis
sheet (antenna)
mounted parts
1 + 1 (-0) mm
3 Peel the aluminum tape.
Note 4: When pasting aluminum tape, please let me
stick to MAIN board rubbing on several times.
2 WWAN antenna cable
WWAN antenna
mounted parts
MAIN board
1 + 1 (-0) mm