Table of Contents
Advertisement
3. Install the new blade onto the
arm connector and make sure
the grooved areas are fully set in
the locked position.
For the proper type and size, see
Maintenance Replacement Parts on
page 11 13.
Glass Replacement
If the windshield or front side glass
must be replaced, see your dealer
to determine the correct
replacement glass.
Headlamp Aiming
The vehicle has a visual optical
headlamp aiming system. The aim
of the headlamps has been preset
at the factory and should need no
further adjustment.
However, if the vehicle is damaged
in a crash, the aim of the headlamps
may be affected and adjustment
may be necessary.
If oncoming vehicles flash their high
beams at you, this may mean the
vertical aim of the headlamps needs
to be adjusted.
It is recommended that the vehicle
be taken to your dealer for service if
the headlamps need to be adjusted.
It is possible, however, to re-aim the
headlamps as described.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
The vehicle should:
Be placed so the headlamps are
7.6 m (25 ft) from a light
colored wall.
Have all four tires on a level
surface which is level all the way
to the wall.
Be placed so it is perpendicular
to the wall.
Not have any snow, ice, or mud
on it.
Be fully assembled and all other
work stopped while headlamp
aiming is being performed.
Be loaded with a full tank of fuel
and one person or 75 kg
(160 lbs) sitting on the
driver seat.
Have the tires properly inflated.
Have the spare tire in its proper
location in the vehicle.
10-33
Advertisement
Chapters
Table of Contents
