Basic Steps - Panasonic SA-HE9 Operating Instructions Manual

1 2,5
3 4
1
POWER
2
SPEAKERS
A B
3
SPEAKERS
A
4
SIZE, DISTANCE, D-INPUT
SPEAKERS
B
FILTER, DR COMP, DIMMER
INPUT SELECTOR
5
SPEAKERS
A B
4
INPUT SELECTOR
Customizing your receiver

Basic steps

If you allow about 10 seconds to elapse between settings, the
procedure is canceled, all settings are returned to how they were,
and the previous display is restored. Begin again if this occurs.
1
Press [POWER, 8].
2
Press [A] and [B] at the same time.
3
Press [A] to select the item you want
to change.
Each time you press the button:
SIZE/DISTANCE/FILTER/DR COMP/D-INPUT/ DIMMER
↑
4
Change the settings ( a a below).
Repeat steps 3 and 4 to complete the necessary
settings.
5
Press [A] and [B] at the same time.
Changing the settings
SIZE
1 1 Press [B] to select the speaker you want to set.
Each time you press the button:
FRONT / CENTER / SURROUND / SUB-WFR (Subwoofer)
↑
2 2 Turn [INPUT SELECTOR] to change the setting.
When you turn the selector:
FRONT: SMALL , / LARGE
CENTER and SURROUND: NONE , / SMALL , / LARGE
SUB-WFR: NO , / YES
3 3 Repeat 1 1 and 2 2 to change other SIZE settings.
DISTANCE
1 1 Press [B] to select the speaker you want to set.
Each time you press the button:
FRONT / CENTER / SURROUND
↑
2 2 Turn [INPUT SELECTOR] to set the distance.
3 3 Repeat 1 1 and 2 2 to change other DISTANCE settings.
FILTER
Turn [INPUT SELECTOR] to set the cut-off.
When you turn the selector:
100 , / 150 , / 200
DR COMP
Turn [INPUT SELECTOR] to change the setting.
When you turn the selector:
OFF , / STANDARD , / MAX
D-INPUT
1 1 Press [B] to select the input position you want to set.
Each time you press the button:
CD COAX / DVD OPT2 / TV OPT1
↑
These are the factory settings. Actual displays depend on the
changes you make. If you change one setting, the other
corresponding setting will also change.
2 2 Turn [INPUT SELECTOR] to change the setting.
When you turn the selector:
COAX , / OPT1 , / OPT2
↑ ↑
3 3 Repeat 1 1 and 2 2 to change other D-INPUT settings.
DIMMER
Turn [INPUT SELECTOR] to change the setting.
When you turn the selector:
OFF , / ON
13
RQT5918