Using The Continuous-Advance Modes - Konica Minolta DIMAGE DIMAGE-Z5 Instruction Manual

USING THE CONTINUOUS-ADVANCE MODES

The continuous-advance drive modes allow a series
of images to be captured while holding down the
shutter-release button. These drive modes are set in
section 1 of the recording menus.
Immediately after selecting the continuous option on
the menu, a selection screen is displayed to select
between standard and UHS continuous advance. Use
the left/right keys of the controller to select the
continuous advance mode. Press the central button of
the controller to set the drive mode. Pressing the
menu button cancels the operation without changing
the drive mode.
Compose the picture as described in the basic
recording operation section (p. 22). Press the shutter-
release button partway down (1) to lock the focus and
exposure for the series.
Press and hold the shutter-release button all the way
down (2) to begin taking pictures. When the shutter-
release button is pressed and held, the camera will
begin recording images until the maximum number
has been taken or the shutter button is released.
The maximum number of frames and the rate of
capture depends on the continuous-advance drive
mode selected. See the notes section on the following
page.
48 A
DVANCED RECORDING
Drive mode Single
Image size Self-timer
Quality Continuous
White balance Progressive
Anti-shake Bracketing
:select :enter
1 2