Focus Area Selection - Konica Minolta DIMAGE DIMAGE-Z5 Instruction Manual

FOCUS AREA SELECTION

Individual focus areas can be selected when recording still images. With auto recording
and Digital Subject Programs, focus area selection is reset when the camera is turned
off. In P, A, S, and M exposure modes, the selected focus area remains active until reset.
Press and hold the central button of the controller until the five spot
focus areas are displayed.
42 A
DVANCED RECORDING
Use the left/right keys of the controller to highlight the desired
autofocus area; the active area is blue.
Press the shutter-release button partway down or press the
central button of the controller to select the area; the other
four areas disappear. Only when a focus area has been
selected, can the controller be used for other camera
operations.
Take the picture as described in the basic recording section;
press the shutter-release button partway down to lock focus
and exposure. Press the shutter-release button all the way
down to take the picture.
Once a focus area is selected, it will remain active even after
the picture has been taken. Press and hold the central button
of the controller to return to the standard focus frames.