SETUP FOR THREE TO FIVE INTERFACES
Use this setup if you want to connect three to five
MOTU interfaces to your computer using a MOTU
AVB Switch™ (sold separately).
The connection to the computer should be
■
Thunderbolt, to support a large number of audio
streams to and from the networked interfaces. A
single Thunderbolt connection supports 128
channels in and out, simultaneously. If you need
more channels, and your computer has a second
available Thunderbolt port, you can make a second
connection to another interface on the network,
with full access to the network from both ports
(128 I/O channels each).
Use a standard Thunderbolt cable. Place it at the
■
end of the Thunderbolt chain.
Additional computers are optional.
All computers and interfaces have full
access to each other on the network.
OR
H A R D W A R E I N S T A L L A T I O N
Use standard CAT-5e Ethernet network cables to
■
connect the interfaces to the MOTU AVB Switch
using their NETWORK ports.
Use the five AVB NETWORK ports on the switch
■
(not the Ethernet port).
Network cable lengths can be long: 100 meters
■
with standard copper wire cables; much longer
with fiber-optic network cables.
See "About CAT-5e cables" on page 36.
■
As an alternative, see "Setup for multiple
■
Thunderbolt and USB interfaces" on page 39.
To add more computers to the network, connect
■
them to any interface, as shown. All computers and
interfaces have full access to each other.
See chapter 9, "Networking" (page 75).
■
37