USB AUDIO INTERFACE SETUP
Use this setup if you want to use your MOTU
device as an audio interface, and your computer
doesn't have Thunderbolt.
Use a standard USB cable.
■
Connect to any USB port (USB2.0 or 3.0).
■
See "USB2.0 class-compliant operation" on
■
page 33.
No driver installation is necessary, (unless you
■
want to use the Web app).
36
SETUP FOR TWO INTERFACES
OR
Use this setup if you want to connect two MOTU
interfaces to your computer.
The connection to the computer should be
■
Thunderbolt, if possible, to support all the I/O for
the networked interfaces.
Use a standard Thunderbolt cable. Place it at the
■
end of the Thunderbolt chain.
Use any standard CAT-5e Ethernet network
■
cable to connect the two interfaces together using
their NETWORK ports.
As an alternative, see "Setup for multiple
■
Thunderbolt and USB interfaces" on page 39.
About CAT-5e cables
Use shielded CAT-5e or
CAT-6 cables, which are a
higher grade version of a
standard Ethernet patch
cable. They are available
wherever network cables
are sold.
H A R D W A R E I N S T A L L A T I O N