Connecting The Cables; Nld - Roland V-Drums TD-1KV Owner's Manual

12
1
Pull out
3

Connecting the Cables

Connect the cable to the sound module and each pads as shown in the illustration.
Each cable has a label indicating the pad to which it should be connected.
Connect if you use the
separately sold OP-TD1C to
add a cymbal.
If you're not adding a
cymbal, "CR2" is not used.
OP-TD1C
CR2
2
SNR
T1
T2
T3
Underside of
the pad
Note
Be careful not to
drop the sound
module.
2
Backside of the
sound module
1
RD
T2
T3
KIK
13
Sound module
Hi-hat pedal
The label on the bottom of each pedal distinguishes
the kick pedal (KIK) from the hi-hat pedal (HHC).
* Before you play, verify that the bolts and knobs are not loose.
CR1
T1
SNR
HHC
Kick pedal
Bottom of the pedal
3
Underside of the
cymbal
HH
5
Use the included cable
clips to secure the
cables.
4
Bottom of
the pedal
Assembly
ENG
JPN
DEU
FRA
ITA
ESL
POR

NLD

CR1
RD
HH
KIK
HHC
7